Is the Bambu Lab X2D worth it in 2026?

Yes, for buyers who want Bambu's X1 Carbon successor with an actively heated chamber and a second nozzle for supports or a secondary material. The X2D starts at $649 solo or $899 with the AMS 2 Pro Combo, prints a 256×256×260 mm volume at up to a 65°C (70°C max) heated chamber with a 300°C hotend. CNC Kitchen's independent review calls it 'probably the enclosed Bambu Lab printer to get' unless you specifically need the H-series' larger build volume or 350°C hotends. The one catch: the second nozzle is meaningfully weaker than the main one, so don't buy it expecting two equal hotends.

What's the catch with the Bambu Lab X2D's second nozzle?

It's fed by a bowden extruder bolted to the back of the machine instead of a direct-drive servo extruder like the main nozzle. Per CNC Kitchen's hands-on testing, the auxiliary nozzle runs slower with higher retractions and lower accelerations, strings more, has no jam or clog detection since its feeder uses a basic stepper motor, and loses about 20 mm of printable width on the left side of the build plate. Some parts printed on it took almost twice as long as the same part on the main nozzle. Treat it as a tool for supports, secondary materials, and non-critical geometry — not a second main nozzle.

Can the AMS feed both X2D nozzles automatically?

No — the AMS 2 Pro has only one exit port, so only one of the two nozzles can be auto-fed from the AMS at a time. Feeding the second nozzle requires either an external spool holder or a second AMS unit, and Bambu's Filament Track Switch lets one AMS feed either nozzle, but not both simultaneously. Factor that into your spool-management plans before buying expecting true dual-material AMS automation out of the box.

How much does the Bambu Lab X2D cost?

$649 for the solo printer, $899 with the AMS 2 Pro Combo, per Bambu Lab's launch pricing. That technically undercuts the P1S's $699 list price, though the P1S has repeatedly been discounted to $399-$499 by retailers like Tom's Hardware — in practice the older P1S is often the cheaper machine on sale even though the X2D is the newer, more capable one at full price.

Bambu Lab X2D or P1S — which should you buy?

Buy the X2D if you need the active 65°C heated chamber for warp-prone engineering filaments, want dual-nozzle support/secondary-material printing, or want built-in AI first-layer and failure monitoring across 31 sensors. Buy the P1S if you print PLA, PETG, TPU, or standard ABS/ASA and can catch it on one of its frequent sales to $399-$499 — the passive enclosure and single nozzle cover that workload just fine for less money. See our full [X2D vs P1S comparison](/compare/x2d-vs-p1s/) for the complete breakdown.

Should I buy the X2D or step up to the H2S/H2D?

Buy the X2D for the smaller footprint if desk space is tight — it starts at the same roughly $649-$1,249 price range as the H2S but in a 256×256×260 mm volume instead of 340×320×340 mm, and the X2D's dual-nozzle setup already covers basic support/secondary-material workflows the H2S's single nozzle can't. Step up to the H2S or H2D only if you specifically need the larger build volume or the H2-series' 350°C hotend for PPS-CF and similar high-temp composites.

Bambu Lab X2D Review 2026: The Dual-Nozzle Upgrade, With a Real Catch

Bambu Lab’s X1 Carbon was discontinued on March 31, 2026, and the X2D shipped in April 2026 as its direct successor — same enclosed, actively-heated chassis, plus a second auxiliary nozzle Bambu pitches for supports and secondary materials. Independent reviewers, including CNC Kitchen, like the main printer a lot. But that second nozzle comes with real limitations worth knowing before you buy, and early owners on Bambu’s own forums have reported AMS feeding issues that haven’t fully settled since launch.

Quick answer: The Bambu Lab X2D starts at $649 solo or $899 with the AMS 2 Pro Combo, prints a 256×256×260 mm volume with a 65°C heated chamber (70°C max) and 300°C hotend, and replaces the discontinued X1 Carbon as Bambu's enclosed flagship. CNC Kitchen's independent review calls it "probably the enclosed Bambu Lab printer to get" for most buyers — but the auxiliary second nozzle is bowden-fed, slower, strings more, and has no jam detection, so it's a support/secondary-material tool, not a true second main nozzle.

Bambu Lab X2D by the numbers

$649 → $899 — the X2D’s launch price ladder: solo printer and AMS 2 Pro Combo, per Bambu Lab and confirmed by CNC Kitchen’s and Tom’s Hardware’s independent reviews.
256 × 256 × 260 mm — the X2D’s build volume, matching the discontinued X1 Carbon’s footprint.
65°C / 70°C max, 300°C — the X2D’s active heated-chamber rating (slicer-adjustable up to 70°C) and max hotend temperature, per Bambu Lab specs.
1,000 mm/s — the X2D’s rated max travel speed after a later firmware update, per CNC Kitchen’s testing.
~20 mm — printable build-plate width lost on the left side to make room for the auxiliary nozzle’s bowden feed hardware, per CNC Kitchen’s hands-on review.
1 — AMS exit ports on the AMS 2 Pro Combo, meaning only one of the X2D’s two nozzles can be auto-fed from a single AMS unit at a time.

X2D vs the discontinued X1 Carbon, at a glance

Spec	Bambu Lab X2D	Bambu Lab X1 Carbon (discontinued)
Status	Current flagship (launched April 2026)	Discontinued March 31, 2026
Nozzles	2 (direct-drive main + bowden auxiliary)	1 (direct-drive)
Build volume	256×256×260 mm	256×256×256 mm
Chamber	Active, 65°C (70°C max)	Active, ~60°C
Max travel speed	1,000 mm/s (post-firmware)	500 mm/s
Starting price	$649	$999 at launch

The 30-second verdict

Buy the solo X2D if you want Bambu’s current enclosed flagship for less than the old X1 Carbon launched at. At $649, the active heated chamber and 300°C hotend handle ABS, ASA, and most engineering filaments that warp on passively-enclosed machines like the P1S.

Add the AMS 2 Pro Combo if you want automatic material swapping. At $899, it’s still cheaper than Bambu’s H-series Combo tiers — just plan around the single exit port, which only auto-feeds one of the X2D’s two nozzles at a time.

Treat the second nozzle as a bonus, not a reason to buy. CNC Kitchen’s testing found it genuinely useful for breakaway supports and secondary materials, but slower, stringier, and without jam detection — good enough for non-critical geometry, not a second main hotend.

Bambu Lab X2D

Best enclosed Bambu Lab printer for most buyers · $649

256×256×260 mm build volume, 65°C active heated chamber (70°C max), 300°C hotend.
Dual nozzles: direct-drive main + bowden-fed auxiliary for supports/secondary materials.
31 sensors and 2 cameras (1920×1080 + 1600×1200) for AI first-layer and failure detection.

Check price on Amazon →

Stocking filament and parts for a shop? A free Amazon Business account unlocks quantity discounts and tax-exempt purchasing.

What the second nozzle actually gets you — and costs you

Bambu markets the X2D’s auxiliary nozzle as a way to print supports or a secondary material without routing everything through the AMS color-swap process. In practice, per CNC Kitchen’s independent testing, that convenience comes with real tradeoffs: the second nozzle is fed by a bowden extruder mounted on the back of the machine rather than a direct-drive servo extruder like the main one, so it runs slower, uses higher retractions and lower accelerations, and strings noticeably more. Some parts printed on it took almost twice as long as the equivalent print on the main nozzle. It also has no jam or clog detection, because its feeder relies on a basic stepper motor rather than the sensor-equipped main extruder — and the hardware box housing it costs you about 20 mm of printable width on the left side of the build plate.

CNC Kitchen’s recommendation: use the auxiliary nozzle for supports, secondary materials, and non-critical geometry, not as a true second main hotend. Print quality off the main nozzle is “excellent,” but the auxiliary nozzle shows small holes on retraction spikes and visible gaps on small perimeters — good enough for a dissolvable support structure, not for a visible part surface.

The AMS single-exit-port limitation

The AMS 2 Pro Combo that ships with the X2D’s bundled tier has only one exit port, meaning it can auto-feed just one of the two nozzles at a time. Bambu’s Filament Track Switch lets a single AMS serve either nozzle, but not both simultaneously — so true automated dual-material printing (one filament per nozzle, both fed from the AMS without manual intervention) isn’t possible with a single AMS unit. Buyers who want that need an external spool holder for the second nozzle or a second AMS entirely.

Early owner reports on Bambu’s own community forum echo feeding trouble beyond just the exit-port ceiling: several threads describe filament reaching a hotend without the extruder gears engaging, triggering false jam warnings, along with scattered reports of slot-specific jams and PTFE-tube friction issues on the AMS 2 Pro. These are forum anecdotes rather than an official Bambu acknowledgment, and experiences are mixed — one owner logged 200 hours without an error, another called the setup “very clunky.” Worth a skim through the X2D section of Bambu’s forum before buying if AMS reliability is a dealbreaker for you.

X2D vs P1S: the price-overlap trap

At MSRP, the X2D’s $649 base price technically undercuts the P1S’s $699 list price — a reversal from the old X1 Carbon-vs-P1S order, where the enclosed flagship always cost more. But the P1S has been repeatedly discounted to $399-$499 by retailers including Tom’s Hardware, a price the newer X2D hasn’t matched since its April 2026 launch. If you’re comparing sticker prices, the X2D wins; if you check current sale prices first, the P1S is usually the cheaper machine in practice despite being the older, less capable one. See our full X2D vs P1S comparison for the complete spec-by-spec breakdown of what the price gap buys.

Bottom line

The Bambu Lab X2D replaces the X1 Carbon as Bambu’s enclosed flagship at a lower starting price, and CNC Kitchen’s independent review calls it “probably the enclosed Bambu Lab printer to get” for buyers who don’t need H-series build volume or 350°C hotends. Buy the solo X2D ($649) for the active heated chamber and 300°C hotend on engineering filaments. Add the AMS 2 Pro Combo ($899) for automatic material handling, but plan around the single-exit-port limit if dual-material automation matters. And treat the auxiliary nozzle as a tool for supports and secondary materials, not a second main hotend — it’s genuinely slower, stringier, and lacks jam detection compared to the primary nozzle.

Bambu Lab X2D vs P1S — the direct head-to-head this review draws on, for deciding between the two enclosed printers.
Bambu Lab H2S review — the larger-format single-nozzle sibling, for buyers who need more build volume than the X2D’s 256×256×260 mm.
Bambu Lab H2D review — the dual-nozzle H-series machine, for comparison against the X2D’s own dual-nozzle setup.
Best carbon fiber 3D printer — how the X2D’s heated chamber stacks up for CF/GF-reinforced filaments.
Best 3D printer support material — the PVA and breakaway spools relevant to the X2D’s auxiliary-nozzle workflow.
Bambu Lab P1S review — the passively-enclosed sibling that often undercuts the X2D on sale price.